use just one loop in outputmgrapplyortest()

we do the magic in updatemons()
This commit is contained in:
Leonardo Hernández Hernández 2022-08-19 10:05:51 -05:00 committed by Leonardo Hernández
parent cb01ce9bcf
commit 9b5f0f0fc5

24
dwl.c
View File

@ -1631,28 +1631,13 @@ outputmgrapplyortest(struct wlr_output_configuration_v1 *config, int test)
struct wlr_output_configuration_head_v1 *config_head;
int ok = 1;
/* First disable outputs we need to disable */
wl_list_for_each(config_head, &config->heads, link) {
struct wlr_output *wlr_output = config_head->state.output;
if (!wlr_output->enabled || config_head->state.enabled)
continue;
wlr_output_enable(wlr_output, 0);
if (test) {
ok &= wlr_output_test(wlr_output);
wlr_output_rollback(wlr_output);
} else {
ok &= wlr_output_commit(wlr_output);
}
}
/* Then enable outputs that need to */
wl_list_for_each(config_head, &config->heads, link) {
struct wlr_output *wlr_output = config_head->state.output;
Monitor *m = wlr_output->data;
if (!config_head->state.enabled)
continue;
wlr_output_enable(wlr_output, 1);
wlr_output_enable(wlr_output, config_head->state.enabled);
if (!config_head->state.enabled)
goto apply_or_test;
if (config_head->state.mode)
wlr_output_set_mode(wlr_output, config_head->state.mode);
else
@ -1669,6 +1654,7 @@ outputmgrapplyortest(struct wlr_output_configuration_v1 *config, int test)
wlr_output_set_transform(wlr_output, config_head->state.transform);
wlr_output_set_scale(wlr_output, config_head->state.scale);
apply_or_test:
if (test) {
ok &= wlr_output_test(wlr_output);
wlr_output_rollback(wlr_output);
@ -1678,7 +1664,7 @@ outputmgrapplyortest(struct wlr_output_configuration_v1 *config, int test)
* we test if that mode does not fail rather than just call wlr_output_commit().
* We do not test normal modes because (at least in my hardware (@sevz17))
* wlr_output_test() fails even if that mode can actually be set */
if (!config_head->state.mode)
if (!config_head->state.mode && config_head->state.enabled)
ok &= (output_ok = wlr_output_test(wlr_output)
&& wlr_output_commit(wlr_output));
else